由于耐磨陶瓷管重量轻，且焊接性能好。因此耐磨陶瓷管可采用焊接、法兰、快速联结等方式，施工安装方便，且可减少安装费用。
焊接连接
耐磨管道焊接连接
陶瓷复合耐磨管焊接连接就是高温或高压条件下，使用焊接材料（焊条或焊丝）将两块或两块以上的母材（待焊接的工件）连接成一个整体的操作方法。
焊接过程中要注意焊件材质和焊材（焊条和焊丝）的化学成分及物理性能是否相符或相近，并采用相应的焊接方法，焊机种类及相应的电流、速度，并保护眼睛不受电弧光的伤害和焊渣飞溅的灼伤。
法兰连接
耐磨管道法兰连接
耐磨陶瓷管法兰连接就是把两个管道连接起来，首先各自固定在法兰上面，两片法兰之间，保持端口的干净，加上法兰垫片，用螺栓固定连接在一起，完成法兰连接。
要注意连接的两片法兰螺栓孔中心圆直径要对应，特点就是易拆卸，易安装。
柔性卡箍连接
耐磨管道卡箍连接
耐磨陶瓷管钢制柔性卡箍安装前须松开压盘螺栓，将该产品拉至安装长度，然后用对角法拧紧，切勿压偏，如架空使用，两端须安装相应的固定支架。
Conveying highly abrasive materials, steel piping systems are under constant attack often over long distances.
Because the outer surface behaves like mild steel, the product can be cut and welded with proper procedure in the field, configured into a variety of fittings, and can accept the standard end options of flanges, weld rings and couplings.
Warranty
We are Quality Department tests and ensures all of our products are 100% inspected unreported. To an offer we customers additional corps of mind, all our products carry a 24-month warranty against defects or faulty workmanship.We fluid-flow products such as pipe and fittings, chokes, orifice plates, etc, carry a warranty against, erosion, defects, and/or faulty workmanship.
The warranty is determined to each creator and the maximum duration maximally in service. Should any of the RS fail within the warranty period, We'll replace or repair the defective product (s) at No. end user. Please contact the Sunny steel for details on the How to obtain a warranty for our products.
Inspections
As part of our quality regimen, 100% of incoming raw materials, semi-finished products, as well as finished products are thoroughly inspected prior to being entered into our inventory. We have established multiple hold points throughout fabrication as well as a comprehensive final inspection for all products.
Our team is highly trained and experienced in servicing and producing all types of steel supplies.
